Opis
ARDEX X 3™
Tile and Stone Mortar
- Interior and exterior use
- Working time: 15 to 20 minutes
- Coverage: 80 sq. ft. (7.4 sq. m)
ARDEX X 3™ Tile and Stone Mortar is a Portland cement-based, polymer-modified mortar with good bond strength and sag resistance and a 3-hour pot life. ARDEX X 3 mixes to a creamy, easy to apply thin set mortar that is water and weather resistant. ARDEX X 3 can be used to install quarry, ceramic and most natural stone* tiles on many common interior or exterior surfaces and also can be used for setting porcelain tile over interior, absorbent concrete and other cementitious surfaces. ARDEX X 3 is recommended for the installation of most tile sizes**, including mosaics, and is suitable for use over concrete floors with in-floor heating systems.
Key Features |
|
---|---|
Standards |
SystemOne Meets or exceeds ANSI 118.4 ISO Classification: C1T |
TECHNICAL DATA ARDEX X 3™ |
InstallationMixing Ratio: 5 1/4 – 6 quarts (5 – 5.6 L) of water per 40 lb. (18 kg) bag. Approximate Coverage: 1/8″ x 1/8″ V-Notch trowel; 160 sq. ft. (14.8 sq. m) 1/4″ x 1/4″ Sq. Notch trowel; 80 sq. ft. (7.4 sq. m) 1/4″ x 3/8″ x 1/4″ Sq. Notch trowel; 60 sq. ft. (5.5 sq. m) PerformanceOpen Time: Up to approx. 10 minutes For complete product technical information, click on the Downloads tab and open the Technical Data download. |
Product Overview |
ARDEX-X-3-Product-Overview |
Technical Data |
ARDEX-X-3-Technical-Data |
Safety Data Sheet-Gray |
ARDEX-X-3-GRAY-SDS |
Specification |
Tile-and-Stone-Tile-Mortars-ARDEX-X-3-Specification |