ARDEX-S-1K-3gal-packageARDEX-S-1K-3gal-package

ARDEX S 1-K™

Kategoria:

Opis

ARDEX S 1-K™

One-Component Waterproofing and Crack Isolation Membrane

  • Flexible, topside waterproofing for interior floors and walls
  • Crack isolation up to 1/8″ (3 mm)
  • Highly workable consistency; minimal drips and splatters

ARDEX S 1-K™ One-Component Waterproofing and Crack Isolation Membrane is an easy-to-use, single-component, load-bearing waterproofing compound that produces a flexible, positive-side waterproof coating for all common interior building substrates requiring protection from topside water exposure that could damage tile installations. It also provides an excellent bonding layer for ARDEX tile and stone setting materials. ARDEX S 1-K can also be used for crack isolation up to 1/8″ (3 mm)*.

  •  

Key Features

 
      • Flexible, topside waterproofing for interior floors and walls
      • Very easy-to-apply, 2-coat system; paint roller or brush
      • Easy to install with a paint roller or brush
      • Use for bathrooms, showers and other wet areas prior to the installation of tile
      • Highly workable consistency; minimal drips and splatters
      • Crack isolation up to 1/8″ (3 mm)
      • Bonds to a wide range of substrates

Standards

 SystemOne™
Meets or exceeds ANSI A118.10
Meets or exceeds ANSI A118.12
IAPMO

TECHNICAL DATA ARDEX S 1-K™

 Installation
Mixing Ratio: Single-component mix. Do not dilute or mix with additives.

Approx. Coverage:
195.5 sq. ft. (18 sq. m) per 3.5 gal. (13 L) unit, 2 coats over drywall
56.75 sq. ft. (5.27 sq. m) per 1 gal. (3.78 L) unit, 2 coats over drywall *
Coverage will vary with substrate surface profile, porosity and texture.

Performance

Working Time: Unlimited. Seal unused portion to prevent product from drying out.
Drying Time: First coat: 1 – 2 hours Second coat: 12 – 16 hours

Flood Test: The final coat must be fully cured (approximately 12 – 24 hours, depending on site conditions).
VOC: < 1 g/L, calculated SCAQMD Methods
Packaging: 3.5 gal. (13 L) pail; 1 gal. (3.78 L) pail, 1 gal. units sold in cartons of four (4).
Storage: Store in a cool, dry area. Do not expose container to sun. Keep from freezing.
Shelf Life: 12 months
Warranty: ARDEX L.P. Standard Limited Warranty applies.

For complete product technical information, click on the Downloads tab and open the Technical Data download.

Product overview

 ARDEX-S-1-K-Product-Overview

Technical Data

 ARDEX-S-1-K-Technical-Data

Safety Data Sheet

 ARDEX-S-1-K-SDS

Specification

 ARDEX-S-1-K_CSI-FORMATTED-SECTION-09-30-00_0818

Podobne produkty